Loop Recording Pedal


MICRO LOOPER inherits the MINI size of the MICRO SERIES. Record, playback, stop, overdub and delete, all these functions can be controlled by one single footswitch. This gives you an easy and direct operation experience. MICRO LOOPER has up to 30 minutes of recording time with unlimited overdubbing. You can focus on your music and need not worry about other troubles.


Produkt-Variante bitte clicken

CHF 118.00

  • verfügbar
  • 3 - 7 Werktage Lieferzeit1

Die wichtigsten Features

  • True Bypass: When Micro Looper is in the Bypass status, it will not affect the original signal, which ensures your signal to be clear and without sound loss.
  • Recording Time: The Micro Looper has up to 30 minutes of recording time, enough for you to lay down your songs. 
  • Unlimited overdubbing: The Micro Looper has no maximum limit for the number of times you can overdub. 
  • High quality sound memorization: Using high quality electronic components ensures that the playback audio signal is as clear as the way it was recorded. You will never lose any of the detail. 
  • Mini Size: Inherit the Mini size of the MICRO SERIES pedals, your pedal board can have more space and therefore you can put more pedals on it. 
  • Loop level knob: This little knob can control the volume of loop. Can’t hear your SOLO? Turn down your volume a little bit! 
  • Easy operation: Stop/Delete/Redo, all these functions are controlled by just one footswitch. 
  • Loop saving function: Worried about losing your recordings after you cut off the power? No need to! The MICRO LOOPER will save all the loop recording data automatically when the power is switched off. You will never lose your inspiration!


How to record Loops/overdub :

  • To start recording, press the footswitch once, the LED will be lit in RED, indicating Micro Looper is in Record mode.
  • To switch to playback, press the footswitch again to quit Record mode.
  • The LED will turn BLUE, and start playback.
  • You can record another loop based on the original loop (Overdub), press the footswitch while the original loop is playing back, the LED will turn RED, indicating that Micro Looper is in Record mode again.
  • Press the footswitch once again to quit Record mode. The LED will turn BLUE. Micro Looper will playback both the original loop and the newly added overdub recording.


How to undo recordings :

  • To delete your last recording, simply press and hold the footswitch for 2 seconds or longer. The LED will blink twice rapidly.
  • Then the recording will be deleted.


How to redo recordings :

  • If you deleted your last recording but you want it back, you can restore it by simply pressing and holding the footswitch for 2 seconds or longer. The LED will blink twice rapidly. Then the recording will be restored.


How to stop/start/delete the loops :

  • To stop the loop playback, press the footswitch twice quickly. The LED will start blinking in BLUE.
  • To start the loop again, press the footswitch once.
  • To delete everything you have recorded, press the footswitch twice quickly and hold down on the second press. The LED will turn off, indicating that all the loop data has been deleted.